Diễn đàn mansion

Unfortunately no one can be told what FluxBB is - you have to see it for yourself.

You are not logged in.

#1 2020-09-14 03:00:26

From: Sweden, Asbro
Registered: 2020-09-13
Posts: 1

Christine stresses that new information has to be produced

Re generative  medicine, possible with 3D printing.
Re generative  medicine, possible with 3D printing?.
By                                                                                                                                                 After presenting at the 3D fab+print Seminar last year, this year Christine Kinet from 3D-side will again speak during the 1-day Conference at COMPAMED / MEDICA that will be held on Monday, .

November 12 at Messe Düsseldorf

‘Regenerative medicine, possible with 3D printing?’ is the title of the  presentation  in which Christine will address how today surgical treatment can be individualized for each patient using 3D Printing.
Asked after her experience at the Seminar in 2017, Christine tells: “It was a very interesting seminar and a great opportunity for attendees to learn about various 3D printing technologies and the  solutions  as well as challenges these technologies pose in the medical field.” Christine first got in contact with Additive Manufacturing during her studies.

“I have studied biomedical engineering in Belgium

graduated in 2014, and during my studies I had the opportunity to discover the use of 3D printing in the medical field,” she tells.

1-Day Conference ‘AM in the medical world’ On Monday

November 12 the full-day 3D fab+print Conference on Additive Manufacturing for medical applications will be held at Messe Düsseldorf in Germany.

Eight speakers will talk about various topics relevant to AM for healthcare

including bioresorbable PLA-based polymers and 3D printed anatomical models.

The day will be rounded-off with a 1-hour Panel Discussion moderated by GE Additive
The one-day Conference will be held in room 814-A

which is on the 1st floor of Hall 8-B, Messe Düsseldorf, Germany.

On November 12 Christine partners up with with another Belgian company

“I will talk.

Together with Grégory Nolens from Cerhum

about the future of 3D printing.
If the human  mechanics  can already be mimicked using 3D printing, one might expect the possibility to 3D-print the human biology in the future,” she says.
“We will discuss our new R&D project to move closer to this future of 3D printing: the regenerative medicine.” Christine tells she looks forward to the Conference to learn and discuss new ideas and  development s in the medical 3D printing field, as well as to share experience with companies involved with the technology.
“One can expect that  the future  manufacturing mode will be fully patient-specific,” Christine continues.
“Indeed,  manufacturing  the same device for a population of patients has been the only way of producing implants.
With the additive manufacturing  revolution  and the decrease of costs, the solution has entered in the surgical theater.
This creates new challenges: how to design and manufacture just-in-time precisely what  the doctor  needs?” ‘Customize’.
About Christine Christine graduated as biomedical engineer and joined 3D-Side almost three years ago after a first medical 3D-printing experience at Materialise.
At 3D-Side, she is responsible for business development.
Assisting surgeons with patient-specific solutions, managing the international sales network and offering their 3D customization expertise to other companies are parts of her daily job.
Christine stresses that new information has to be produced, exchanged and validated.
“The device must be delivered on time (just in time logistics) for each treatment while it cannot be stocked.  Finally, it must be certified, for each manufacturing with specific regulations that apply.
This makes patient-specific devices a field where efficient communication, design and production are required.
And this is produced under strict regulations and certifications.” Christine concludes: “We took up this challenge to bring 3D technology to surgeons, and therefore to overcome these issues in communication, design and production.
In doing so.

3D-Side has developed ‘Customize’

a web platform to efficiently market custom-made devices, offering the missing link in the surgery market.” Please find the Advance Conference Program online.
More information on the scheduled presentations for November 12 can be found online as well.
Tickets are available for only € 295,- including VAT and registration needs to be done via the Messe Düsseldorf Ticket Shop.

The ticket includes entrance to the COMPAMED / MEDICA fairgrounds on November 12
The Conference will be held in room 814-A

which is on the 1st floor of Hall 8-B.
christine kinet.
gregory nolens.
Messe Düsseldorf.
regenerative medicine.
Facebook               Twitter                                                                      NAMIC joins ASTM International as strategic partner   UL announces UL 3400 certification to Lockheed Martin                 3D fab+print - The global community for the 3D Print and AM industry.


If you are interested in the different advertising possibilities, please  with us.
The QUIKRETE® Companies and the U.
Department of Energy’s (DOE) Oak Ridge National Laboratory (ORNL)entered a cooperative research and development agreement to design next-generation concrete for use in the production of large-scale structures through a 3D printing process.
Research centres from all Catalonia gathered for the kick-off meeting of BASE3D, a company consortium that will enhance R&D in the emerging field of 3D printing.
Molybdenum-99 (Mo-99) is an important medical isotope used to help radiologists detect heart disease, bone decay and some types of hard-to-find cancers.
Printed circuit boards (PCBs) are the electronic paths on an insulated surface that help power appliances such as smartphones, biomedical devices, and other electronic technologies.
Fonon Corporation declares the acquisition of FTL, LLC supporting the company’s ‘2015 Reorganization Plan’ transitioning from a development stage to a sustainable growth stage company.
The Altair Partner Alliance (APA) has announced the addition of Additive Works’ Amphyon to its software offering.
Amphyon is a simulation-driven, process software for powder bed-based, laser beam melting additive manufacturing processes.
3D fab+print KCI Publishing Jacob Damsingel 17 NL-7201 AN Zutphen The Netherlands P.
Box 396 NL-7200 AJ Zutphen  +31 57 55 85 270   +31 57 55 11 099.
© 3D fab+print 2015-2017                                                   We use cookies to make this website work better for you and to track site visits anonymously.


Board footer

Powered by FluxBB